PLAIN NON WOVEN BINDER TAPE

Our Polyester Non-Woven Binder Tape, (also called light non-woven tape or thin non-woven tape) has a plain and smooth surface. Its properties are high strength, light unit weight, low thickness, good softness, sulphide-resistance and is suitable for wrapping and binding all kinds of cables such as power cable, control cable, communication cable, optical cable, etc.

Technical Characteristics Table:

Specification	Unit	Typical Result
Thickness	mm	0.05 ± 0.01	0.06 ± 0.015	0.08 ± 0.015	0.10 ± 0.02	0.12 ± 0.02	0.22 ± 0.03
Mass per unit weight	g/m²	25±5	30±5	40±5	60±10	70±10	80±10
Tensile strength	N/cm	≥15	≥25	≥30	≥40	≥50	≥50
Elongation	%	≥10	≥12
Short term stability	°C	230
Long term stability	°C	90
Moisture content	%	≤5

Winding Solution:

Type	ID (mm)	OD (mm)	Width (mm)	Core
Pad	52 (2“), 58 (2.3"), 76 (3“), 83 (3.25"), 102 (4“), 152 (6“), 203 (8“)	Up to 600	≥5	Plastic, Paper
Spool	76 (3“)	250-350	Up to 35	Paper

The OD depends on tape width and customer requirement. For other sizes please contact us.

Packaging and Marking: The product will be packed in paper carton or non woven bag with PE film bag inside. It is then sealed and packed on a wooden pallet. After it is fixed, an external plastic coversheet is wrapped around it to avoid water penetration.

Storage: The product has a shelf life of 12 months from production date if stored in unopened original packages, under dry and clean conditions at temperatures between 10-30°C. The product will be damaged if stored in a moist area or contacted with water.