Skip to main content
Plain Non Woven Binder Tape

Plain Non Woven Binder Tape

This polyester non woven tape, (also called light non-woven tape or thin non-woven tape) has a plain and smooth surface. Its properties are high strength, light unit weight, low thickness, good softness, sulphide-resistance and is suitable for wrapping and binding all kinds of cables such as power cable, control cable, communication cable, optical cable, etc. 

Technical Characteristics Table:

Specification Unit Typical Result
Thickness mm 0.05 ± 0.01 0.06 ± 0.015 0.08 ± 0.015 0.10 ± 0.02 0.12 ± 0.02 0.22 ± 0.03
Mass per unit weight g/m² 25±5 30±5 40±5 60±10 70±10 80±10
Tensile strength N/cm ≥15 ≥25 ≥30 ≥40 ≥50 ≥50
Elongation % ≥10 ≥12
Short term stability °C 230
Long term stability °C 90
Moisture content % ≤5

Winding Solution:

Type ID
(mm)
OD
(mm)
Width
(mm)
Core
Pad 52 (2“), 58 (2.3"), 76 (3“), 83 (3.25"), 102 (4“), 152 (6“), 203 (8“) Up to 600 ≥5 Plastic, Paper
Spool 76 (3“) 250-350 Up to 35 Paper

The OD depends on tape width and customer requirement. For other sizes please contact us. 

 Packaging and Marking: The product will be packed in paper carton or non woven bag with PE film bag inside. It is then sealed and packed on a wooden pallet. After it is fixed, an external plastic coversheet is wrapped around it to avoid water penetration.

Storage: The product has a shelf life of 12 months from production date if stored in unopened original packages, under dry and clean conditions at temperatures between 10-30°C. The product will be damaged if stored in a moist area or contacted with water.

Related Products